Hand Manual Hydrostatic 2.5MPA Pipe Pressure Test Pump With Water Tank For Sale
Description
This kind of pressure test pump has the advantages of simple structure, easy operation and maintainance. The pump body and water outlet part are all made of copper parts, which are not easy to rust and have good corrosion resistance. It is suitable for working sites in various harsh environments. It is a necessary tool for pipeline construction.
Specification
| Photo | Model | Pressure | Flow volume | G.W/N.W | Water tank volume | Meas | Note |
| | SD-25C | 2.5MPA | 13ML | 3.8/3.4KG | 12L | 32*20*26cm | Iron box
Steel plate thickness 1mm |
| SD-25B | 2.5MPA | 13ML | 4.5/4.0KG | 12L | 32*20*26cm | Iron box
Steel plate thickness 1mm |
| | SD-40B | 4.0MPA | 30ML | 5.0/4.0KG | 12L | 32*20*26cm | Iron box
Steel plate thickness 1mm |
| SD-60B | 6.0MPA | 30ML | 5.0/4.0KG | 12L | 32*20*26cm | Iron box
Steel plate thickness 1mm |
| | SD-50B | 5.0MPA | 12ML | 5.0/4.5KG | 12L | 32*21*26cm | Iron box
Steel plate thickness 1mm |
You see our price is base on above red one, for other size, if you want know price, pls feel free to contact us, tks.
Advantages:
1. Hydraulic testing for leaks in heating and oil installations, air-conditioning, splinker and systems.
2. Completed with high pressure hose and connectors.
3. Pump plunger can be lubricated and has replaceable seals.
4. Efficient running needle valves ensure continuous operation.
5. Testing and Pressure range: 0-50 bar.
6. Testing equipment hydro test pump
| Trouble | Possible Cause | Method |
| 1) No water sucked. | a) Insufficient tightening torque for suction hose or gasket missing
b) Suction/delivery valves sticking
c) Pressure applied to cylinder inside owing to idle running.
d) Dust stuck to strainer | a) Fit packing and tighten suction hose.
b) Follow the instructions of caution sticker on motor.
c) Disconnect the high pressure hose and purge extra air. Wait water outflow through delivery nipple.
d) Wsah the strainer in clean water or |
| 2) No pressure rise low jet pressure | a) Pressure control valve malfunction.
b) No water flows back through overflow hose.
c) Nozzle hole clogged with dust. | a) Overhaul and inspect. Replace valve and valve seat if damaged.
b) Replace nozzle tip because nozzle hole is eroded abnormally
c) Remove dusst. |
| 3) Pressure fluctuates.(Suction hose,high pressure hose,etc, vibrate severely.) | a) Air sucked.
b) Valve or valve seat damaged or choked up with dust.
c) Regulating valve and valve seat choked up with dust or damaged. | a) Rc-fasten suction hose tight.(Check it for with or without gasket.)
b) Inspect and clean suction and delivery valves or replace them.
c) Clean or replace them. |
| 4) Pressure drop on midway and rise fail.Hose vibration. | a) No water sucked.(Dust stuck to strainer.)
b) Pressure control valve malfunction. | a) Clean strainer.
b) Disasemble and clean. |
| 5) Motor fails to start. | a) Improper wiring connection
b) Pilot lamp fails to light.
c) Defective connector.
d) Too high pressure. | a) Cleck wiring connection to switch, power outlet, etc.
b) Check connections and electric bulb.
c) Replace connector.
d) Loosen adjusting screw. |
Packing& packing:
Small Electric hydraulic test pump (hereinafter referred to as pump) is for all kinds of pressure vessels, pipelines, valves, boilers,cylinders, pressure vessels, steam boilers, fire equipment as laboratory hydraulic test and laboratory for obtaining high-pressure liquid equipment. Pressure test products and supporting pressure test, test engineering.
In order to ensure that the goods can reach you safely,we'll use Supply standard export packing,wooden packing or according customer request packing. Shipping by sea, by air, UPS, DHL, TNT, EMS, Fedx and other ways or according customer request way send goods for customer.
Instruction for use of Manual test pump
1. Before using the pressure test pump, check in detail whether the joints of each component are tightened, whether the pressure gauge is normal, and whether the inlet and outlet pipes are installed properly.
2. In order to improve the pressure test efficiency, the container or equipment to be tested can be filled with water first, and then the outlet pipe of the pressure test pump can be connected.
3. During the pressure test, if you find that there is a lot of air in the water, you can open the water valve and let the air out.
4. If any slight water seepage is found during the pressure test, the work should be stopped immediately for inspection and repair, and it is strictly forbidden to continue to increase the pressure in the case of water seepage.
5. After the pressure test is completed, first loosen the water valve, and the pressure will drop to avoid damage to the pressure gauge.
6. When the pressure test pump is not in use, the water in the pump should be drained and a small amount of oil should be sucked in to prevent corrosion.
Our service:
Our Expertise is our Strength. Our team of experts understand the products and its application very well, who can guide our valuable customers to select the right product for the right application.
Light Weight Portable Hand Pressure Test Pump With Reasonable Price
The color could be designed by yourself, the same as your logo.
Product Tags:
|
|
2.5MPA Manual Hydrostatic Test Pump With Water Tank Images
|
